Version 5.4 Version 5.2 Version 5.0 Version 4.2
Version 4.1 Version 4.0 Version 3.1 Version 3.0 Version 2.0
Ø Support for Microsoft Windows® 7
Ø Updated SAE J2534 error handling
Ø
Optimized
Ø
J2534-2 optional CAN Mixed Format support over
Ø Added support for RP1210B Command 27, J1939 inter-packet delay
Ø Fix lost connection errors over Bluetooth
Ø Fix intermittent concatenated receive messages, observed over J1850 VPW link
Ø
Improved handling for receiving invalid J1939
Ø
Remove thread leak in RP1210 driver resulting from
multiple failed connect attempts (e.g., if
Ø
Corrected
Ø
Corrected J2534 PassThruReadVersion
Ø
J2534 PassThruOpen
Ø Corrected direct CAN connection failing after OBDII connection over CAN performed
Ø Add support for 64-bit operating systems
Ø RP1210 CAN/J1939 bus statistics support via proprietary RP1210_Ioctl function
Ø J2534/1 CAN bus statistics support via proprietary PassThruIoctl IDs
Ø
Define .ini support, ‘RTSCTSInterPacketDelay’,
for modifying J1939/21 RTS/
Ø Define .ini support, ‘BinLoad’, for enabling forced firmware updates
Ø
Improved J1939/21 RTS/
Ø ‘Hino Cluster’ protocol support
Ø Remove thread leak in RP1210 driver
Ø
RP1210 driver crash when echoes turned on for
Ø J2534/1 PassThruReadMsgs return values for empty buffer
Ø J1708 filter behavior with multiple clients connected
Ø
MBE
Ø
Ø
KWP2000 fix for intermittent, invalid switch to
CARB mode in firmware, would result in
Ø
Add 0-length
Ø Start Menu shortcuts now installed for All Users
Ø Allow RP1210B broadcast support with RP1210A-format J1850 messages
Ø
Fix
Ø Fix MBE J1708 passthrough mode issues as of Release 5.0
Ø
Clarified
Ø
Fix MBE J1708/
Ø Updated adapter recovery support for CAN bus off errors on RoHs boards
Ø Fix high incident rate of J1708 connection failures on RoHs boards
Ø Correct problems with GM J1850 on non-RoHs boards.
Ø RP1210B-1 compliant (Revised 6/2007)
Ø J2534/1 support, minus programming voltage and READ_VBATT
Ø
J2534/2 CAN channel connections defined for
CAN_CH2 and
Ø
Improved GMLAN support over
Ø Support for “ATEC” (J1708-formatted) 160-Baud connections
Ø
Added command-line /h switch for installing HINO
J2534 support,
no longer installed by default due to compatibility issues with some
applications
Ø Added support for GM J1850 block transfers
Ø
Addressed
Ø
Corrected J1939_T1 timing for Transport Protocol
support, alleviates issues with multiple applications
running during TP session
Ø Correct for possible J1939 transmit buffer overflow under heavy busload
Ø
Fix
Ø Corrected J1708 collision handling to address possible issues with ECUs that also deal poorly with collisions
Ø
Ø RP1210B broadcast message support
Ø
ALDL pass-thru protocol, fix for escape
character transmit not resetting receiver,
resulting in partial receive characters corrupting subsequent transmit requests
Ø
Fix MBE J1708/
Ø
RP1210B
Ø Implemented Verisign code signing of installation
Ø
Re-mapped J1708 and J1939 .ini entries,
addressing
Ø
Disable RP1210B filtering of
Ø
Supports Windows
Ø Addresses issue with Allison J1708 reprogramming failing
Ø Bluetooth connection: Fix for intermittent invalid RP1210 error 149, ERR_CONNECT_NOT_ALLOWED
Ø Limited J2534 support for Hino applications
Ø Improved Bluetooth messaging throughput
Ø Support for obtaining device serial number
Ø RP1210B support for changing J1708 baud rate
Ø
Support for J1708 and
Ø
Modified adapter to flash power LED when
Ø IESCAN protocol for Allison
Ø Support for /nr (no reboot) switch to command line for driver install to disable prompting for reboot
Ø Bluetooth connection: Added support for notifying user of available firmware updates
Ø Support to firmware update to indicate current device and available update firmware versions
Ø Bluetooth connections: Modified virtual COM port search to resolve connection issues on multi-core platforms
Ø Fix for client closing application when device is offline resulting in driver dll lock up
Ø Modify RP1210A Command 18 behavior, “Receive Off” to flush receive buffers per specification
Ø AM/PM fix in timestamp of debug log files
Ø Support for J1850 GM and Ford, GM ALDL and OBDII protocols
Ø Support for obtaining current device firmware version
Ø Support for Allison-specific J1850 protocol
Ø Updated RP1210B log file format
Ø Improper formatting of standard CAN headers
Ø Fix CAN receive messages being dropped during periods of high bus load